Your cart
There are no more items in your cart
Door lighting · original-fitting and wired modules
Check the housing and connection before choosing door logo lights
Compare twelve wired LED door logo light designs with options for two or four doors. Plug-and-play fitting applies only where your car’s original opening and electrical connection match the selected module. Other versions use connection wires or contacts.
Current prices, stock and purchase options are shown on each product page.
Choose the fitting and logo design
Ford door logo lights
7 × 3 cm. Two connection wires. Choose the available option for 2 or 4 compatible doors.
View Ford
Land Rover / Range Rover door logo lights
7 × 2.5 cm. Integrated connector. Choose the available option for 2 or 4 compatible doors.
View Land Rover / Range Rover
Mercedes-Benz door logo lights
7 × 5 cm. Wired connection through the integrated connector shown. Choose the available option for 2 or 4 compatible doors.
View Mercedes-Benz
MINI Cooper door logo lights
7 × 2.5 cm. Integrated connector; no external wires on the module. Choose the available option for 2 or 4 compatible doors.
View MINI Cooper
Nissan door logo lights
10 × 4 cm. Integrated connector; no external wires on the module. Choose the available option for 2 or 4 compatible doors.
View Nissan
Opel door logo lights
5.5 × 3 cm. Two integrated metal contacts; no external wires on the module. Choose the available option for 2 or 4 compatible doors.
View Opel
Renault door logo lights
11 × 3 cm. Two connection wires. Choose the available option for 2 or 4 compatible doors.
View Renault
Audi Sport door logo lights
5.5 × 3 cm. Integrated connector. Choose the available option for 2 or 4 compatible doors.
View Audi Sport
Audi S line door logo lights
5.5 × 2.5 cm. Connector connection; adapter leads shown in the photographs are included. Choose the available option for 2 or 4 compatible doors.
View Audi S line
Peugeot door logo lights
7 × 3 cm. Integrated connector; no external wires on the module. Choose the available option for 2 or 4 compatible doors.
View Peugeot
Mitsubishi door logo lights
10 × 6 cm. Two connection wires. Choose the available option for 2 or 4 compatible doors.
View Mitsubishi
Audi quattro door logo lights
5.5 × 2.5 cm. Integrated connector. Choose the available option for 2 or 4 compatible doors.
View Audi quattroCompare the listed housings and connections
| Design | Housing dimensions | Connection described |
|---|---|---|
| Ford | 7 × 3 cm | Two connection wires |
| Land Rover / Range Rover | 7 × 2.5 cm | Integrated connector |
| Mercedes-Benz | 7 × 5 cm | Wired connection through the integrated connector shown |
| MINI Cooper | 7 × 2.5 cm | Integrated connector; no external wires on the module |
| Nissan | 10 × 4 cm | Integrated connector; no external wires on the module |
| Opel | 5.5 × 3 cm | Two integrated metal contacts; no external wires on the module |
| Renault | 11 × 3 cm | Two connection wires |
| Audi Sport | 5.5 × 3 cm | Integrated connector |
| Audi S line | 5.5 × 2.5 cm | Connector connection; adapter leads shown in the photographs are included |
| Peugeot | 7 × 3 cm | Integrated connector; no external wires on the module |
| Mitsubishi | 10 × 6 cm | Two connection wires |
| Audi quattro | 5.5 × 2.5 cm | Integrated connector |
What does plug-and-play mean for a door light?
A plug-and-play installation uses a matching original housing and electrical connection. You still need to compare the existing light on your car with the selected product: the shape, size, retaining points and connector all matter.
These twelve products are connected to the vehicle’s electrical supply. Some have integrated connectors, some have external wires and the Opel design has integrated metal contacts. An integrated connector is a connection type, not a promise that the module matches every model of the make.
Choose one kit for two doors or two kits for four doors
| Purchase option | Number of projector units | Fitting check |
|---|---|---|
| 1 kit for 2 doors | 2 units | Confirm compatible openings and connections on the intended pair of doors |
| 2 kits for 4 doors | 4 units | Check both front and rear doors, including any differences between the fittings |
Select the required option on the product page. The four-door option is useful only where all the intended doors have suitable fittings. A car with different front and rear door lights may need a more specific comparison.
Four checks before ordering
- Inspect the existing door light. Confirm that there is an appropriate opening or fitting at the intended location.
- Measure the housing. Compare length, width, clips and shape with the module shown.
- Compare the connection. Check the connector, contacts or wires rather than relying only on the logo.
- Review the quantity and instructions. Choose two or four doors and follow the fitting procedure for that product.
Specific designs: CANBUS, contacts and connection wires
The Audi quattro product is specifically described as a CANBUS version. That detail should not be extended to every other design in the collection. The Opel design uses integrated metal contacts, while some other modules show external connection wires or integrated connectors.
Use the photographs and installation information for the exact variant you choose. The vehicle catalogue is a useful starting point, but the actual housing and connection on the car are the final fitting checks.
What if the car has no original door-light opening?
Start with the general car door logo light guide and make-and-model catalogue. Wireless products fitted to an appropriate area of the door panel have different requirements from modules intended for existing light fittings.
Frequently asked questions
Are all twelve designs universal?
No. Compare the housing, opening and electrical connection on the car with the chosen product.
Does an integrated connector always mean plug-and-play?
No. Plug-and-play fitting requires the connector and housing to match the original fitting. A connector alone does not establish compatibility.
Which design is identified as CANBUS?
The Audi quattro listing in this selection is described as a CANBUS version.
Can I order only two units?
Select the product option labelled one kit for two doors. The two-kits-for-four-doors option supplies four units.
Where can I see the current price for each configuration?
Open the specific product and choose the door option. Its current price and purchase details are shown there.
Choose the module that matches your fitting
Compare dimensions and connection type, then select the required door option on the product page.
Andmonc buying guide. Check the selected listing for current product details, price and availability.